Need Help?

Register now to gain access to the Arcadia Products Community Portal. Its designed to provide assistance to our Customers, Users and Contributors who want to integrate and get the best possible results from the Arcadia products.

The Benefits of Membership

Gain access to:
- Arcadia Knowledgebase.
- Troubleshooting Assistant.
- Product Documentation.
- Arcadia Products Forum.
- Live-chat and Technical Support.

Not Yet Registered?

Signing up is easy and takes less and 3 minutes. Take a moment to create a user account and get verified instantly. Register now to join the Arcadia Products Community to gain access into valuable tips and updates and the newest product releases.

Sign up instantly!

 

Includes D3+ Desert T5 Lamp!

★ ★ ★ ★ ★

Customer Reviews

Our brand new Slimline T5 fitting working hard in this animal room. You can see the colossal amounts of light produced from our award winning T5s. Neil Livefoodsbypost.

I have noticed huge improvements in behavior, feeding & activeness patterns not to mention also giving better viewing light for myself giving more vivid colours. Lee Trush.

They looked very tidy, easy to fit and most important for me good UV output and it has not disappointed. Slim, easy to fit from unpacking, installing and switching it on only took me less than 5 minutes Phillipniceguy, RFUK.

T5 SLIMLINE LUMINAIRE PENDANT

The Arcadia Slimline High Output T5 UVB fitting is a plug in, ready to use, reptile keeping miracle. It is suitable for all Vivaria and Terraria over 2 feet in length, and for use with all exotics. Using just one water resistant removable power socket this T5 unit is very neat and tidy in the vivarium and very easy to fit. The unit itself with the highly effective built in T5 reflector, one screw removable mounting plates and even an Arcadia Reptile D3+ 12% UVB High Output T5 lamp!

  • Provides a high LUX and huge amounts of safe, usable UVB for pet Reptiles and Amphibians
  • IP65 as standard
  • Can be fitted inside all wooden vivaria or seated onto the top of mesh topped vivariums/terrariums

The Benefits of T5 Slimline Luminaire

Lighting for Reptiles and Amphibians with UVB has become a definite science and as tech improves we can match captive reptile’s needs to the best of our abilities. This really is a one stop solution to all of your high output reptile lighting needs. Generating a photogradient has never been easier. Simply fit the Slimline T5 fitting inside your viv at the front edge between the roof and the front plate above the door and offset into your hot end as per our “Lighting Guide”. This will provide you with a no fuss, high output source of UV rich lighting that is well out of your view but very usable by your pet reptiles and amphibians.


Fitting

Using just one water resistant removable power socket this T5 unit is very neat and tidy in the vivarium and very easy to fit. The unit itself with the highly effective built in T5 reflector, one screw removable mounting plates and even an Arcadia Reptile D3+ 12% UVB High Output T5 lamp! Fitting Instructions


Lamp Included

Includes Arcadia Reptile High Output T5 Reptile Lamp.

  • Provides a high LUX and huge amounts of safe, usable UVB for pet Reptiles and Amphibians
  • T5 EXTRA HIGH OUTPUT
  • 100% more visible light than T8
  • 95% more UV light than T8

Code Watt Dimensions Lumens Temp UV-A UV-B
A1FS0144R 24W 606 x 80 x 35mm 850lm 7000K 12% 30%
A1FS0244R 39W 910 x 80 x 35mm 1600lm 7000K 12% 30%
A1FS0344R 54W 1210 x 80 x 35mm 2400lm 7000K 12% 30%

Product Safety

Lamps can be fragile pieces of equipment. Please follow the following steps to ensure the safe fitting and use of fluorescent lamps.

At either end of a fluorescent lamp you will see two brass coloured connection pins. These are the electrodes that take energy from the controller to start and run the lamp. These are quite fragile by nature. It is imperative that both pins are safely located into the pin sockets inside the lamp holder before the lamp is pressed into place. Failure to line the pins up correctly will cause the pins to bend and snap and break through the lamp cap rendering the lamp unusable. The Ultra-seal lamp ring must be unscrewed from the lamp holder and placed over the lamp prior to fitting and only re-seated onto the lamp holder when you are sure that the lamp pins are seated correctly. High Output T5 lamp leads must be fully unwound also or you may notice lamp flickering or beaks in illumination. You can also use a very small amount of a substance like Vaseline to lubricate the lamp ring and so stop it fusing to the lamp after long periods of heat. After cooling lamps can be wiped clean with a damp cloth once every two weeks or so to remove any dust build up from the lamp, this in turn will help to maintain the lamps full output. The all important reflector should also be wiped clean at the same time.

Latest News