★ ★ ★ ★ ★
The UVB canopy is very lightweight, and does not pull or stretch the material it is resting on. It is extremely easy to install, I will be using this product again in my next large enclosure and would recommend others to do the same!
Faretto Alogeno Basking Spot
Una fonte efficientissima di luce e calore, il faretto alogeno Basking Spot è ideale come lampada supplementare da usare assieme alle lampade per rettilari a vapori di mercurio con regolatore o ai sistemi d’illuminazione fluorescente per i rettilari.
Portalampada In Ceramica Con Riflettore
Un portalampada in ceramica con riflettore tornito, ideale da usare con le nostre lampade a vapori di mercurio con regolatore e faretti alogeni Basking Spot.
D3+ UV FLOOD LAMP
Unità di illuminazione UV completa, con lampada compatta D3+ ad altissima potenza di 24 watt e riflettore estremamente efficiente per un’intensa illuminazione a raggi UV su un’area specifica.
- High Light and UVB levels
- Very energy efficient
- Easy internal fitting through the fitting
- Lampada impermeabile (IP67), senza sfarfallamenti
- Easy lamp change
- Produce un’intensa luce UV focalizzata con la possibilità di impostazione del gradiente luminoso
- Allows the proper production and use of the D3 cycle
- Emissione bilanciata di raggi UVA e UVB e un colore luminoso naturale
- Ideale per vivari poco profondi per specie desertiche e vivari profondi per le specie arboree
- Just 35cms long
- Can be used horizontally or vertically to obtain the area of emission required
- Eliminate MBD!!
- 24W Plant Pro lamp can also be purchased and used alongside this fitting if you wish to grow live plants
I vantaggi della D3 UV Flood Lamp
Over the last 5 years reptile lighting science has grown and evolved and allowed the keeping and breeding of captive reptiles to become easier and more productive. Arcadia Reptile have led the world in designing the very best “Solar re-creation” systems and pioneered True High Output T5 technology.
Arcadia Reptile are delighted to push the boundaries even further with the Arcadia Reptile “UV Flood”. This highly effective unit allows a keeper to provide high levels of visible light and UV over a targeted area. Light is emitted at 45 degrees from the fitting and allows the keeper to set a pattern of light over a designated area. This provides a wide basking area for the animal to use and allows the keeper to provide areas of useful shade where required for a full and effective photogradient.
The fitting can be easily fitted into a vivarium by inserting 2 screws through the screw holes in the top of the fitting. UV flood uses a seal and lamp collar to secure the lamp tight into the unit which means that the entire fitting is IP67 waterproof. The fitting can be affixed to the Flood lighting stand which allows the safe and effective use of the product over tortoise tables.
The Arcadia Reptile UV flood uses state of the art electronics to provide a flicker free and highly energy efficient source of lighting. High Output Compact lighting enables keepers to use a true High Output source of lighting in smaller enclosures than ever before and as a supplementary “boosting zone” in larger enclosures.
Can be seated on mesh topped vivs to provide light in a sleek shallow designed fitting.
UV Meter Readings
Lamps can be fragile pieces of equipment. Please follow the following steps to ensure the safe fitting and use of fluorescent lamps.
Every brand of lamp has a very slightly different lamp cap. This is the terminal that you screw into the lamp holder. Some lamps have a slightly thinner screw thread and a longer cap. This will allow a user to insert the lamp further into the lamp holder than is required. Over time and as the lamp holder is heated up and cooled down these electrical terminals inside the lamp holder will have stretched out. This would in the case of the Arcadia D3 basking UVB lamp then present as an intermittent power supply to the lamp. In effect the terminals inside the lamp holder would not make a stable connection. This would cause the thermal cut out built into the lamp to turn the lamp off and could cause the user to think that the lamp was faulty. In fact the lamp is perfect. After a removal of power and the min 5-10 min’s cooling period the lamp will Re-Strike and run.
Lamps can be fragile pieces of equipment. Please follow the following steps to ensure the safe fitting and use of D3 UV basking lamps.
Firstly turn the lamp off at the wall and REMOVE THE PLUG. After allowing time for the lamp to cool gently un-screw and remove the lamp. After checking that the fitting is completely un-plugged use an insulated flat bladed screwdriver to move the copper terminal downwards from the top of the lamp holder. If there is a separate terminal in the side of the lamp holder move this inwards also. You will only need to move these terminals a millimetre or two. When happy that the fitting is safe re-site your lamp holder and replace the lamp. The fitting should be fine to use now. If you are unsure of anything you should consult an electrician before use. if you still have problems after doing this, consult with the place of purchase for more advice.